SESPM1040-541-LT-DC - DC-powered self-enclosed switch with (4) 10/100/1000Base-T PoE++ ports + (1) combo 10/100/1000Base-T RJ-45 or 100/1000Base-X SFP port.

Standards

• IEEE 802.3
• IEEE 802.3ab
• IEEE 802.1Q
• IEEE 802.3af
• IEEE 802.3at
• IEEE 802.3bt

Ethernet Ports

• (4) 10/100/1000 Mbps RJ-45 ports
• (1) 100/1000 Mbps SFP/RJ-45 combo ports CAT5e cable or higher recommended for 60 Watts; CAT6 cable or higher recommended for 90 Watts

Auxiliary Power Port

• 2-position wire terminal block (≤12AWG) with screw retention

Serial Console Port

• RS-232 RJ-45

MAC Address

• 8K MAC address table

Max Frame Size

• 10K bytes

Alarm Status

• Accessible through CLI access, BLE interface or Integrated Management Software

Dimensions

• Width: 10.05” [255.3 mm]
• Depth: 4.34” [110.1 mm]
• Height: 8.48” [215.4 mm]

Power Input

• AC Version: Universal input 120-240VAC
• Low Voltage DC Version: 48VDC (input range 40-59VDC)
• PoE Powered PD Version: 90 Watts PoE

Power Consumption (no PoE load)

• AC Version: < 20 vA
• DC Version: < 10 W
• PoE Powered PD Version: ≤ 5 W

Power-over-Ethernet

• Max PoE Budget ≤90 Watts on individual ports (specific port configuration may apply)
  AC Version: 180 Watts total
  DC Version: 240 Watts total
  PD Version: 80 Watts total
• 12VDC auxiliary power (on PD version only)
• 2-position bare wire terminal block with screw retention up to 12AWG wire size

Environment

• Operating: -30°C to +70°C (Inside Enclosure)
• External Operating: -40°C to +50°C
• Storage: -40°C to +85°C
• Humidity: 5% to 95% (non-condensing)

Weight

• 4.8 lbs. [2.18 kg]

Certifications

• Emission EN 55022, Class A, Immunity EN55024, Meets Surge Protection as specified in GR-1089 CORE Issue 4; ITU-T K.21 6 kV on AC line, Ingress Protection IP66, NEMA 4X, CE, EN 61000-4-2 (ESD), EN 61000-4-4 (EFT), EN 61000-4-5 (Lightning), EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, UL 62368-1, CSA 62368-1-14, NFC: NFC Forum Type 2 Tag, ISO/IEC 14443A; BLE: BLE 4.2

Warranty

• 2 Years